Automatic fare collection is an intelligent channel management equipment developed and produced by our company for many years. The gate of automatic ticket checking system organically integrates machinery, electronics, microprocessor control and various reading and writing technologies. The intelligent control and management of the channel can be realized through the configuration of different reading and writing equipment, the adoption of reliable safety protection devices, real-time alarm system and direction indication interface.

The appearance of the equipment is formed by stamping stainless steel plate, which is beautiful and generous, rust proof and durable, and adopts standard external communication interface. It can easily integrate IC card and other card readers on the gate equipment, provide civilized and orderly access for people in and out, and prevent illegal people from entering and leaving at the same time; In addition, the system is specially designed to meet the fire-fighting requirements. In case of emergency, it can ensure that the passage is unobstructed and facilitate the timely evacuation of personnel.

● product advantages:

Advantages of three bar gate:

1. It is very effective to realize single person traffic, with high safety and reliability;

2. Low cost;

3. It has strong waterproof and dustproof ability and strong adaptability to the environment. It is suitable for outdoor and indoor.

Advantages of airfoil gate:

1. The traffic speed is the fastest among all gates;

2. The channel width is between the three bar gate and swing gate;

3. The appearance is beautiful, and the materials of the wing plate are rich;

4. In case of emergency, the gate wing will quickly retract into the box, which can easily form an obstacle free passage, improve the traffic speed and facilitate pedestrian evacuation.

Advantages of swing gate:

1. The passage width is the largest among all gates, which is more suitable for pedestrians or bicycles carrying luggage and parcels, and can also be used as a special passage for people with mobility difficulties;

2. Compared with the three bar gate, the pedestrian passage detection module is added, which can effectively detect the passage target and has strong anti tailing ability;

3. It has strong plasticity in appearance, rich types of materials for the blocking body and diversified forms of the box, which is easy to design a very beautiful shape. Therefore, it is often used in high-end occasions such as office buildings, intelligent buildings, clubs and so on;

4. There is no mechanical collision during the operation of swing gate, and the noise is relatively small.

● technical parameters:

○ channel width:

Three bar gate: 550mm;

Airfoil gate: 550mm for conventional channel and 900mm for barrier free channel;

Swing gate: 550mm for conventional channel and 900mm for barrier free channel;

Structure: 304 or 316 stainless steel plates are used for stamping and forming the whole product shape, which is rust proof, firm and durable. The equipment is simple to use;

Production process: full computer numerical control laser cutting machine production;

○ traffic direction: one-way and two-way (adjustable);

○ light prompt: traffic status indication;

○ anti pinch mode: mechanical structure and infrared induction dual anti pinch function;

Working environment: indoor and outdoor (with rainproof shed);

Power supply voltage: AC220V ± 10%, 50Hz;

○ drive motor: swing gate DC brushless motor (35W / 24V); Wing brake DC brush motor (100W / 48V);

○ normal service life: 5 million times;

○ traffic speed:

Three bar gate: 20 ~ 25 people / min;

Airfoil gate: > 30-40 persons / minute;

Swing gate: 25 ~ 30 people / min;

○ gate opening and closing time:

Three bar gate: 1-2 seconds;

Airfoil gate: 1s;

Swing gate: 1 ~ 2 seconds;

Time required to enter the traffic state after power on: < 3 seconds;

Automatic reset time after failure: < 10 seconds;

Working environment: indoor and outdoor (shade shed);

○ temperature: - 10 ℃ - 50 ℃;

○ relative humidity: ≤ 90%, no condensation.

● structure principle:

Box body: it protects internal components such as movement and control module and plays a supporting role. The main material is usually 304 or 316 stainless steel;

Movement: it is composed of various mechanical parts as a whole (including driving motor, reducer, etc.), and uses the mechanical principle to control the opening and closing action of the blocking body. DC brush motor;

Auxiliary module: including LED indication module, counting module, pedestrian detection module, alarm module, authority input module, etc.